HDfury DVI/HDMI to RGB Converter *Red Edition* Μετατροπέας απο DVI και HDMI σε VGA RGB, περιλαμβάνεται καλώδιο VGA θηλυκό σε DB9P
Dfury is a revolutionnary product that allows you to use in full resolution (1080p) any HDMI/DVI device on PC monitor, video projector or older HDTV/Plasma that are without a HDMI entry!
If you own a high quality monitor/projector/tv that does not have a HDMI connector you need this device, it will save you from buying a new expensive screen to enjoy 1080p resolution when your screen can already support it!
HDfury module will transform any "technically able" ANALOG display into a DIGITAL display performing a perfect visual HD&Full HD fury @ 720p/1080p from any HDMI/HDCP sources such as PS3, X360 Elite, HD-DVD&Blu-Ray player, SAT&Cable HDTV setbox, HDMI graphic card, and more.
Since firmware 1.80 Playstation3 allow DVD upscalling to 720p/1080p ONLY
through HDMI ! (as well as PS1 and PS2 games)
3 versions are available, which are basically the same unit, but they are supplied with a different connecting cable:
- BLUE : Standard Edition (RGB/VGA display with SUB-D HD15 FEMALE input)
HDfury & VGA > VGA Xtender (10-15cm) [SUB-D HD15 FEMALE/MALE]
- GREEN : Marquee/NEC Edition (5x BNC FEMALE input display)
HDfury & VGA > 5x BNC Xtender (10-15cm) [SUB-D HD15 FEMALE/5x BNC MALE]
- RED : Barco Edition (DB9p FEMALE input display)
HDfury & VGA > DB9p Xtender (10-15cm) [SUB D HD15 FEMALE/DB9p MALE]
As many Barco owners already have a source connected to their 5x BNC input, we made a special BARCO edition with a DB9p cable that you can hook up on Port3 of your Barco proj.
However the Green edition is also suitable for Barco (on port 5) and any others display with 5x BNC input (for ex: some high end PC monitor have 5x BNC input)
The Blue Edition is the most common and standard for HDTV, LCD, CRT, PC screen, any display with a SUB-D HD15 FEMALE input.
The backside of the packaging (see HDfury pictures & packaging section) will represent the different "hooking" way and will be printed accordingly to their color code : RED for Barco, GREEN for Marquee/NEC and BLUE for the standard edition.
Easy to remember : R/G/B
DVI/HDMI(HDCP) input/convertor module for RGB display (so-called "HDfury 1080prgb").
DVI-D 24p Female Port Input (100% digital).
A HDMI -> DVI-D cable can be use to connect to an HDMI source.
RGB 4:4:4 (8 bits) digital input (every HDMI source MUST be RGB 4:4:4 compatible).
Compatible with non-HDCP or HDCP sources.
Compatible with any RGB Display
Directly connect to VGA input.
Easy to install within a minute. (PlugandPlay)
10 bits 175MHz triple video DAC - Inter-DAC : 2%
RGB-H/V Male Port D-SUB 15 Output video analog signals (0,7Vpp over 75 ohms impedance)
Ultra short Analog links (<1 cm) on the HD fury RGB 1080p for optimal quality.
DVI video bandwidth in VGA/RVB outputs: 25-165MHz
DVI Data Rate - Bandwidth 1.65 Gbps (Single link)
Maximum resolutions: UWXGA (1920x1200) at 60Hz or SXGA (1280x1024) at 85Hz Computer compatible (PC, Mac)
HDTV ready (480p/576p/720p/1080i/1080p48/50/60 compatible)
DVI1.0 compliant / HDMI interoperable and HDCP ready
HD-DVD and Blue Ray Disc players compatible
HDCP compatible with embedded keys loaded.
Energy management : DVI et VESA DPMS compatible.
Ultra low power consumption in Standby (3,5mA)
Maximum power : 0.4A under 5V (at 165MHz pixel clock)
On-board DC/DC converter (15V to 5V) with extra-low EMI signature
Power +5V from DVI/HDMI
Blue LED to display active digital link.
Low cost solution ? Single IC solution
Small size : 75x56mm black cabinet
Installation: the RGB 1080p module is DIRECTLY screwed to the back of the display (where VGA/YUV SUB-D plugs stand).
Shortest RGB analog video link as possible
HDCP rules compliant: no end-user access to decrypted analog video. Once screwed, this module becomes "a part of the display itself".
Professional factory made (mass-production) using pick/place and reflow/wave solder pro. equipment.
Gold Platted connectors, tracks and material
Warranty Info One year warranty
Use your display now, and get much more value when you resell it !
It maximum output limit are above the 1080p resolution which makes this device absolutely hassle free to handle 1080p video data flow continuously during years !
HDfury DVI to VGA signal converter delivers clean video at the highest resolution up to 1920x1080P.
The in-line adapter is simple to install, connect to any VGA display and run a DVI cable to your source.
The DDA delivers native resolution video with the internal 1.65Gbps bandwidth, ideal for both PC and AV sources
Εικόνα Προϊόντος / Πακέτο :
Easy Buy World Warranty:Το συγκεκριμένο προϊόν έχει εγγύηση για 24 μήνες. The warranty time of a product depends from vendor and model-type of product. We recommend to always check official vendor websites, to find better info regarding a product's warranty period.
Need help? Click here for a short demo